- Mahr Material hoppers, ensures the free flowing of material from a loader or central receiver. Materials range from pellets, powders, granulate, and flake. For non-flowing materials Mahr can introduce agitation techniques to improve material flow.
- OSRL, OSLC and OSRIL Hopper Loaders come with integral motor and control, they are ideal for conveying material over short distances. Based on their Stainless-Steel construction and filter cleaning system, these hopper loaders are perfect for conveying pellets as well as regrind.
- Mahr’s MDU ensures the immediate flow of material from the material storage hopper into a continuous or batching process. The MDU promotes the flow of regrind, wood flour, and other non-free flowing material without noise, vibration, or the creation of dust. Material is pre-conditioned exiting the MDU, enabling improved performance for refilling or mixing material.
- Our MPL series pneumatic conveying units are designed to convey low rates of material ranging from granulate to powders. All conveying units are very versatile and offer Mahr’s Mechanical Cleaning Technology (MCT) for all sizes of our loaders & receivers.
- The universal M-Flex feeder is suitable for feeding granules, pellets, free and non-free flowing powders regrind materials, flakes and fibers.
- Mahr’s AS25, AT16 feeders are specifically designed to feed free flowing products as well as poor flowing powder satvery low rates. There movable feed hopper makes it ideal for applications that require quick material changes. To make a material change, just remove the existing hopper and replace it with a new clean hopper.
- Mahr feeders have been designed to have a wide range of flexibility for the different bulk solid materials and throughput ranges. The universal single screw feeder AS60 is suitable for feeding granules, pellets, free and non - free flowing powders, regrind materials, flakes and fibers.
- Mahr feeders have been designed to have a wide range of flexibility for the different bulk solid materials, and throughput ranges. The universal twin screw feeder AT20 is suitable for feeding granules, pellets,free and non-free flowing powders regrind materials, flakes and fibers. The feeder is designed with a multiple wing agitator ensuring full agitation of the entire ingredient compartment.
- Mechanical gear box with lifetime lubrication
- 370W DC motor with speed control in protection class IP 54
- Operating and material temperature -20..60°C (-4..130°F)
- Gear boxes in the sizes of 7:1, 15:1, 28:1
- Weight without accessories 33 kg
- Color outside light grey RAL7035
- Mahr’s AS130, AT70 gravimetric feeder is ideally suited for dosing powders, pellets, granulates, regrinds, fibers, and flakes in continuous and batching processes. The compact modular design gives the operator the flexibility to meet changing process requirements
- Our 50 series feeders is our smallest feeder to date. The design offers a 50mm (2”) in diameter feeding disc. The base feeder design is sized to feed low rate feeding applications 0.002 to 1.0lb/hr (1g/hr to 453g/hr). All rates can vary based upon the density, flow-ability, and size of material. The 50 series is the size of a standard coffee mug the mounting ability holds unlimited possibilities! No auger or vibratory feeders can match the 50’s capabilities, in terms of size, feeding capability and repeat-ability. All of Mahr’s Disc series feeders are designed to handle bulk materials ranging from powder to pellets. This rate can vary based upon the density, flow-ability, and size of material.
- Our 100 series feeders are our most popular feeder which offers the most versatility of all our feeders. The design offers a 100mm (4”) in diameter feeding disc. The base feeder design is sized to feed low rate feeding applications .01 to 200lb/hr (0.005 to 90kg/hr). All rates can vary based upon the density, flow-ability, and size of material.
- Our 150 series feeder helps bridge the gap between the 100 and 200 Series feeders. Like our entire disc feeder family, versatility is the key to its performance. The design offers a 150mm (6”) in diameter feeding disc. The base feeder design is sized to feed low rate feeding applications 0.6 to 500lb/hr (.03-226 kg/hr). All rates can vary based upon the density, flow-ability, and size of material. The 150 series small size allows easy mounting to almost any processes. Like all of our other series feeders it holds unlimited possibilities! No auger or vibratory feeders can match the 150’s capabilities, in terms of size, feeding capability and repeat-ability.
- Our 200 series feeders are the largest of our Micro Disc Feeders. The 200 series offers the same options, and versatility, which is the key to its performance. The design offers a 200mm (8”) diameter feeding disc. The base feeder design is sized to feed low rate feeding applications 0.1 to 800lb/hr (.05-362kg/hr). All rates can vary based upon the density, flow-ability, and size of material. The 200 series small size allows easy mounting to almost any processes. Like all of our other series feeders it holds unlimited possibilities! No auger or vibratory feeders can match the 200’s capabilities, in terms of size, feeding capability and repeatability
- Product Features: MC50 - Is our single feeder Volumetric drive controller. This is a PLC based controller that operates both our stepper motor and DC/AC drives. It comes with a color touchscreen HMI MC50G - Is our single feeder Gravimetric controller. This is a PLC based controller that operates both our stepper motor and DC/AC drives. It comes with a color touchscreen HMI MC50 Plus - Is our multi-component Volumetric or Gravimetric controller. This is a PLC based controller that operates both our stepper motor and DC/AC drives. It comes with a color touchscreen HMI
